Today, Letai would like to share with you some knowledge about Timing belt. As an elite research and development team focusing on transmission products, welcome to discuss with you.
The Timing belt has no deviation after working, and the gear transmission ratio is accurate. Although the Timing belt is made of elastic material, because the load rope will stretch under the effect of supporting force, the belt pitch diameter can be kept unchanged, so that the belt and the transmission gear root can be properly toothed, so that the synchronous transmission system will not deviate, and the accurate gear transmission ratio can be obtained.
Timing belt has high mechanical efficiency and good energy-saving effect. Since Timing belt is a synchronous transmission system and does not roll, its mechanical efficiency is high, which can generally reach 0.98. Compared with the V-belt pulley, the energy-saving effect is significant.
The gear transmission ratio of Timing belt is large and tight. The gear transmission ratio of Timing belt transmission can generally reach up to 10. When the gear transmission ratio is relatively large, its structure is more compact than the V-belt pulley. Since the Timing belt transmission system is a toothed transmission system, and its pulley diameter is much smaller than the V-shaped pulley for power transmission with sliding friction. In addition, since the Timing belt does not need a larger supporting force, the size of the pulley shaft and bearing can be reduced. Therefore, compared with the V-belt pulley, the Timing belt transmission system has a more compact structure under the same gear transmission ratio.
The Timing belt is convenient for maintenance and low in use cost. Because the load-bearing rope in the Timing belt is made of glass fiber, stainless steel wire and other materials with low tensile strength, the tensile strength of the drive belt is not large during operation, and the support force is not often adjusted like that of the V-belt and chain drive. In addition, the Timing belt does not need any lubrication during operation, and is easy to maintain. The use cost is far lower than that of V-belt, transmission chain, and transmission gear.
The timing chain can still operate normally in harsh environmental conditions. Although the Timing belt transmission system has the above characteristics compared with other transmission systems, it has very clear provisions on the pitch during installation, complex production and manufacturing processes, and high raw material costs.
The above is to share the content about Timing belt with you. If you still don't understand or need it, you can come to consult. Welcome everyone to come and choose.